| Colour | |
|---|---|
| Coverage | |
| Brand |
GEL BUILDER BASE COAT
# 7999 Gel Builder Base Coat
Base coat for Gel Builder. Apply a thin layer and cure for 2 x 30 seconds in a Depend UV/LED lamp. The lamp is tailored to Gel Builder, ensuring proper curing of the material.
Build salon-quality nails at home with just a few simple steps! Change your nail shape, strengthen your natural nail, or extend it with tips. With Gel Builder, you get hard, stable, and durable nails with salon quality that lasts up to 3 weeks. The starter kit contains everything you need to get started quickly and easily. With Gel Builder, your nails only need a light cleaning with Cleanser before you begin your treatment. The UV/LED lamp is developed in symbiosis with the Gel Builder system, and each layer is cured for 2 x 30 seconds to ensure safe and proper curing of the material.
The viscosity of the gel allows you to either extend or strengthen, while it is smooth enough to be self-leveling. After curing the Top Coat in the lamp, cleaning with Cleanser remains. Your Gel Builder nails are now cured, dry, resistant to tough impacts, and have a fantastic shine.
- Safety Information
- How to
- Content
- Academy
Read the entire instruction manual and safety information in the Gel Builder Starter Kit carefully. Follow it step by step and have all products and accessories ready before starting the treatment. Keep this instruction for future treatments.
Only use the specified products according to the instruction manual and never mix with other brands.
Use a Depend UV/LED lamp that is compatible with Gel Builder and ensures proper curing of the material.
Do not use this product if:
You have previously had an allergic reaction after using UV/LED-cured nail products.
You are sensitive to acrylates as these products may cause an allergic reaction.You have wounds, cracks, etc. on the cuticles or if your nails are in poor condition (thin, dry, flaky).
You are a nail biter or have short nails where the nail edge (tip) ends below the skin on the fingertips.
Safety information:
Gel Builder Base Coat, Gel Builder, and Gel Builder Top Coat. The product is not intended for use by individuals under 16 years of age. Keep out of reach of children. The product is not intended to be applied more than once every 3 weeks.
Avoid contact with skin. Ensure application is limited to the surface of the nails and not to surrounding skin or cuticles. If Base Coat/Top Coat or Gel Builder gets on the skin or cuticles, gently remove the product with a Cleanser on a cotton pad. Once curing is complete, wash the skin thoroughly with soap and water to remove any residual products. Avoid contact with eyes. If the product gets in your eyes, rinse gently with water for several minutes, remove any contact lenses, and continue rinsing. If eye irritation persists, seek medical advice/care.
Curing with Depend UV/LED lamp: The lamp has a timer that should always be set to 30 seconds. For curing for 60 seconds, first press the 30-second button once, and when the lamp turns off, press the 30-second button again. It is important to always follow the specified times according to the instructions. Shorter times do not cure the material properly, resulting in an increased allergy risk and poorer durability.
Allergy information:
Contains ingredients that may cause allergic reactions in sensitive individuals. Discontinue use of this product if you develop redness or itching. If burning, itching, or swelling occurs during treatment, remove uncured material with Cleanser on a cotton pad and then wash your hands thoroughly with soap and water. If the problems persist, consult a doctor for advice. If skin irritation or rash occurs after treatment, seek medical advice/care.Always leave a good safety margin from the cuticle.
For detailed instructions on application techniques for reinforcement and extension, see the instructions for the Gel Builder Starter Kit.
General application technique:
To avoid polish getting on the skin, we recommend that you always:
– Have good lighting and working position when applying the products.
– Polish with a good safety margin from the cuticle, especially when applying transparent products as they are harder to see.
– Wipe off the brush against the inside of the bottle neck when applying Base Coat and Top Coat to avoid getting too much polish on the brush, resulting in thick layers. Too much polish increases the risk of it running towards the cuticle and poor adhesion.
Remember that the polish does not dry until you cure it in the UV/LED lamp, so you have plenty of time during the application itself.Important! Make sure that you really have all your fingers under the UV/LED lamp’s light. Be careful not to touch the nail with your fingers during the treatment.
How to remove Gel Builder
Depending on your nail type and nail quality, it can be experienced as easier or harder to remove Gel Builder. Therefore, we have chosen to use 2 different methods for this.
To remove reinforcement, you can use Method 1 or 2. We primarily recommend Method 1, which works for most nail types. For the others, we recommend Method 2.To remove extension with a tip, Method 2 should be used.
Method 1: Gel iQ Remover Oil gently removes Gel Builder with a plant-based oil. For this method to work, a certain amount of growth between the cuticle and Gel Builder is required, which one naturally has after Gel Builder has been on for up to 3 weeks. The method is gentle on both the nail and the cuticle due to its unique formula, where a reaction between Gel iQ Remover Oil, water, and Gel Builder allows the material to release from the nail.
Method 2: A more traditional removal. Here, Gel iQ Remover and Gel iQ Removal Wraps Foil are used as tools to simplify the removal.
Our formulations are continuously updated and the ingredients may therefore vary slightly over time. For current content, please see the ingredient list on the purchased packaging.
Animal origin:Vegan formula, does not contain raw materials of animal origin.
Ingredients: # 29137999 Bis-Hea Poly(1,4-Butanediol)-9/Ipdi Copolymer, Hydroxypropyl Methacrylate, Isobornyl Methacrylate, Methacrylic Acid, Ethyl Trimethylbenzoyl Phenyl, Phosphinate, Silica, BHT.
For more useful tips and FAQ, please visit our knowledge bank Depend Academy
Matching products
